...
- Connect USB cable (A in Figure above) from Arduino to Raspberry Pi USB Port (Any of the four available)
- Connect USB cable (B in Figure above) from USB Camera to Raspberry Pi USB Port (Any of the four available)
- Connect mini USB power cable (C in Figure above) to Raspberry Pi mini USB power port and power supply.
- Wait for Raspberry Pi to startup.
- Raspberry Pi will start in in Wireless router mode giving out Wi-Fi network name as IOTKit-Pi3
- Connect your laptop to IOTKit-Pi3 Wi-Fi network name using password atomiton
- Launch a web browser and type type http://1.1.1.1:8080/fid-kit/kitsetupkitsetupui/index.html
- Configure your personal Wi-Fi Network. Note that you can configure multiple Wi-Fi Networks.
- After Raspberry Pi rebooted, connect your laptop back to your personal Wi-Fi network.
- Login to TQLStudio portal using your TQLStudio credentials.
- Click on any of your project and go to Thing Spaces to view the IP address assigned to IoTKit Raspberry Pi
- Launch TQLEngine User Interface by clicking on the IP Address link
- Login to TQLEngine UI default credentials [Username: TQLEngine@atomiton Passwrod: tql123]
- You will find two default projects loaded - IoTKitThings and IoTKitSetup
- Refer to Working with IoTKit Things below.
...