...
https://communities.cisco.com/docs/DOC-60826
Latest IOX Image
http://sandbox.atomiton.com:8080/fid-downloads/res/downloads/ir800-universalk9-bundle.SPA.156-3.M2.bin
...
Access Router via Console
- Take a mini USB Cable and connect one end of the mini USB cable to console port of the router and other end of the cable to your MAC/PC USB port.
The chipset CP210x from Silicon Labs requires special drivers before you can connect.
- Download the driver here and install it
Check your devices,you will see two new ones (SLAB...)
sebastiankoch@~$ls
-
lah
/
dev
/
cu.
*
crw
-
rw
-
rw
-
1
root wheel
17
,
9
May
18
15
:
03
/
dev
/
cu.SLAB_USBtoUART
crw
-
rw
-
rw
-
1
root wheel
17
,
11
May
18
15
:
09
/
dev
/
cu.SLAB_USBtoUART5
...
Now you can directly connect to the console through
/dev/cu.SLAB_USBtoUART5
sebastiankoch@~$screen
/
dev
/
cu.SLAB_USBtoUART5
- The connection can be closed by
CTRL + A, K
Boot the device from rommon-2 to the IOS:
To boot from rommon-2 prompt to the router IOS, an IOx image is required.
In rommon-2 mode, boot it up using the IOx image. The IOx image starts the boot sequence and once completed, the device should come up from rommon-2 to the router IOS.
rommon-2> boot flash:ir800-universalk9-mz.SPA.156-3.M Press RETURN to get started! IR800>
The IOx image is booted up successfully from rommon 2 to the IOS.
IR800>en
IR800#show version | i image
System image file is "flash:ir800-universalk9-mz.SPA.156-3.M"
Complete the IOS Configuration
Follow this template configuration.
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
! ! Last configuration change at 19:49:29 UTC Wed Jan 18 2017 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service internal service unsupported-transceiver ! hostname IR800 ! boot-start-marker boot system flash:/ir800-universalk9-mz.SPA.156-1.T1 boot-end-marker ! ! no logging console enable secret 5 $1$Ntmx$CBEK7WPOOw8/0.xdtxYV7/ ! no aaa new-model ethernet lmi ce service-module wlan-ap 0 bootimage autonomous ! ignition off-timer 20 ip dhcp excluded-address 192.168.1.1 192.168.1.5 ip dhcp pool gospool network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 8.8.8.8 domain-name tqlioxapps.com option 42 ip 128.138.140.44 ip domain lookup source-interface Vlan999 ip domain name atomiton.com ip name-server 10.0.1.1 ip inspect WAAS flush-timeout 10 ip dhcp-client update dns ip cef no ipv6 cef ! multilink bundle-name authenticated chat-script lte "" "AT!CALL" TIMEOUT 20 "OK" license udi pid IR829GW-LTE-VZ-AK9 sn FTX1941805R iox hypervisor sched-policy 90 username tql privilege 15 password 0 tql123 redundancy notification-timer 120000 controller Cellular 0 lte sim max-retry 0 lte failovertimer 0 lte gps mode standalone lte gps nmea ip lte modem link-recovery rssi onset-threshold -110 lte modem link-recovery monitor-timer 20 lte modem link-recovery wait-timer 10 lte modem link-recovery debounce-count 6 interface GigabitEthernet0 no ip address shutdown interface wlan-ap0 no ip address arp timeout 0 no mop enabled no mop sysid interface GigabitEthernet1 no ip address interface GigabitEthernet2 no ip address interface GigabitEthernet3 no ip address interface GigabitEthernet4 switchport access vlan 999 no ip address interface Wlan-GigabitEthernet0 no ip address interface GigabitEthernet5 ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly in duplex auto speed auto ipv6 address autoconfig ipv6 enable ! interface Cellular0 ip address negotiated ip nat outside ip virtual-reassembly in encapsulation slip dialer in-band dialer idle-timeout 0 dialer string lte dialer watch-group 1 dialer-group 1 async mode interactive routing dynamic interface Vlan1 no ip address ! interface Vlan999 ip dhcp relay information check-reply no ip dhcp client request tftp-server-address ip dhcp client lease 365 0 0 ip address 10.0.1.70 255.255.255.0 ip nat outside ip virtual-reassembly in ! interface Async0 no ip address encapsulation scada ! interface Async1 no ip address encapsulation scada ip default-gateway 10.0.1.1 ip forward-protocol nd no ip http server no ip http secure-server ip nat inside source list NAT_ACL interface Vlan999 overload ip nat inside source static tcp 192.168.1.6 8443 interface Vlan999 8443 ip nat inside source static tcp 192.168.1.6 22 interface Vlan999 2222 ip nat inside source static tcp 192.168.1.8 8080 interface Vlan999 8080 ip nat inside source static 192.168.1.6 10.0.1.71 ip nat inside source static 192.168.1.8 10.0.1.72 ip access-list standard NAT_ACL permit 192.168.0.0 0.0.255.255 control-plane line con 0 stopbits 1 line 1 2 stopbits 1 line 3 script dialer lte no exec transport preferred lat pad telnet rlogin lapb-ta mop udptn v120 ssh transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh line 4 no activation-character no exec transport preferred none transport input all transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh line 7 modem InOut no exec transport input all transport output all line 1/3 transport preferred none transport output none stopbits 1 line 1/4 transport preferred none transport input all transport output none stopbits 1 line 1/5 1/6 transport preferred none transport output none stopbits 1 line vty 0 4 password tql123 login transport input telnet no scheduler max-task-time ntp master end |
Upgrade to Latest IOX Image
- Download this image to your local computer.
- Copy the image to router's flash using scp. [copy scp://baseerkhan@10.0.1.100//Users/baseerkhan/Downloads/ir800-universalk9-bundle.SPA.156-3.M2.bin flash:]
- bundle install flash:ir800-universalk9-bundle.SPA.156-3.M2.bin
- write memory
- reload
ioxclient Tool
What is ioxclient?
...
Code Block | ||||||
---|---|---|---|---|---|---|
| ||||||
descriptor-schema-version: "2.0" info: name: Atomiton A-Stack description: "IOx Atomiton A-Stack Thing Computing Runtime" version: "1.0" author-link: "http://www.atomiton.com" author-name: "Atomiton Inc" app: # Indicate app type (vm, paas, lxc etc.,) type: paas resources: profile: c1.large disk: 50 network: - interface-name: eth0 ports: tcp: - 8080 startup: runtime: java-se-embedded-cp3 runtime-version: 1.8 runtime-options: classpath: $CAF_APP_PATH/ java-options: -Djava.net.preferIPv4Stack=true -jar $CAF_APP_PATH/atomiton.tqlengine.jar target: x.jar |
...