...
| Attribute | Description/ Purpose | |
|---|---|---|
| 1 | Sid | Unique ID |
| 2 | Name | Name of the Rule |
| 3 | Description | Description and purpose of Rule |
| 4 | Enabled | Identifies if a rule must be executed (Values: true/false) |
| 5 | LastRun | Stores the last time the rule was executed |
| 6 | LastStatus | Stores the result of the last run (Values: Success/ ERRCON1/ ERRCON2.. ) In case of error, the time between subsequent executions can be inceased increased and Rule disabled with fatal message at point. Value will be the most severe failure in case of multiple conditions |
| 7 | CheckCondition | 1..* Contitions Conditions to be executed for this rule (e.g. A presence of a facet and a http connection check for a task group) |
| 8 | isRecoverable | Indicates if the rule has a recovery action |
| 9 | RecoveryAction | Recovery Action |
| 10 | Type | The type of condition to be tested |
| 11 | ComponentName | This is a logical grouping of Alarm conditions based on the target application needs |
| 12 | AlertCount | Count of successive Alerts raised for this Condition (Reset when Condition is successful) |
...
| Attribute | Description/ Purpose | |
|---|---|---|
| 1 | Sid | Unique Id |
| 2 | RuleId | Identifies the Rule this condition belongs to |
| 3 | Type | The type of recovery action to be taken |
| 4 | Active | (True/False) A recovery action becomes active when the Condition is successful, and inactive when the a condition fails. This prevent the recovery from running before the condition is up and running. Also it prevents multiple attempts at recovery, specially when previous recovery is still in progessprogress |
| 5 | AttemptAfterCount | The number of alerts after which recovery must be attempted. If value is 1, recovery will be attempted instantly. |
...